| /SAPMP/LO_RC006 |
Larger reel determined due to clearance |
| /SAPMP/LO_RC007 |
Outer diameter of determined reel > maximum reel size |
| /SAPMP/LO_RC008 |
Larger reel determined due to plus-tol; w/o plus-tol &, max. plus-tol & % |
| /SAPMP/LO_RC009 |
Individual length + plus-tol > maximum length of &, maximum plus-tol: & % |
| /SAPMP/LO_RC010 |
Reel determined in variant table; 'manual' indicator will be set |
| /SAPMP/LO_RC011 |
Material master data for cable & has not been maintained |
| /SAPMP/LO_RC012 |
Material master data for the reel is incomplete |
| /SAPMP/LO_RC013 |
Plus-tol not taken into account due to max. reel size; max. plus-tol & % |
| /SAPMP/LO_RC100 |
*Error |
| /SAPMP/LO_RC101 |
Reel with matching core diameter could not be determined |
| /SAPMP/LO_RC102 |
Reel with matching clearance could not be determined |
| /SAPMP/LO_RC103 |
Reel with matching load capacity could not be determined |
| /SAPMP/LO_RC104 |
Reel could not be determined for this length |
| /SAPMP/LO_RC105 |
Reel with matching run-out flange could not be determined |
| /SAPMP/LO_RC106 |
Reel category & is invalid |
| /SAPMP/LO_RC107 |
No reel can be determined; maximum reel size < outer diameter |
| /SAPMP/LO_RC108 |
Cable diameter = 0; reel calculation cannot be executed |
| /SAPMP/LO_RC109 |
Plant & reel category &; reel category sequence is invalid |
| /SAPMP/LO_RC110 |
Reel category and reel type have not been maintained for coil delivery |
| /SAPMP/LO_RC111 |
According to coil check, no coil is permitted for this data |
| /SAPMP/LO_RC200 |
*Manually calculated reel |
| /SAPMP/LO_RC201 |
Reel has been calculated manually |
| /SAPMP/LO_RC202 |
Material master data for the manually calculated reel is incomplete |
| /SAPMP/LO_RC203 |
Check manually calculated drum (clearance) |
| /SAPMP/LO_RC204 |
Check manually calculated reel (minimum core diameter) |
| /SAPMP/LO_RC205 |
Check manually calculated reel (run-out flange) |
| /SAPMP/LO_RC206 |
Check manually calculated reel (load capacity) |
| /SAPMP/LO_RC207 |
Maximum reel size < outer diameter of the manually calculated reel |
| /SAPMP/LO_RC208 |
Check manually calculated reel (length) |
| /SAPMP/LO_RC300 |
*Dialog messages |
| /SAPMP/LO_RC301 |
Reel categories have not been defined |
| /SAPMP/LO_RC302 |
Reel category & has not been defined in plant & |
| /SAPMP/LO_RC303 |
No reel categories have been defined in plant & |
| /SAPMP/LO_RC304 |
Plant &, reel category &: reel category sequence has not been defined |
| /SAPMP/LO_RC305 |
Enter a reel category |
| /SAPMP/LO_RC306 |
Sequence contains shared reel types |
| /SAPMP/LO_RC307 |
Reel type & is not defined for this function (technical data) |
| /SAPMP/LO_RC308 |
Table updated |
| /SAPMP/LO_RC309 |
Plant and reel category are the same; check your entry |
| /SAPMP/LO_RC310 |
Plant & reel category &: Reel type sequence is deleted when you save |
| /SAPMP/LO_RC311 |
No control parameters have been defined for reel calculation in plant & |
| /SAPMP/LO_RC312 |
The value 'general' is invalid for the application |
| /SAPMP/LO_RC313 |
Enter a reel category |
| /SAPMP/MM001 |
&1 &2 &3 &4 |
| /SAPMP/MM002 |
Only one selected item will be transferred |
| /SAPMP/MM003 |
Select the item to be split |
| /SAPMP/MM004 |
Classification of batch & is not consistent |
| /SAPMP/MM005 |
Classification of batch & is not complete |
| /SAPMP/MM006 |
Conversion factor is not filled for material &1, batch &2 |
| /SAPMP/OC_APO000 |
&1 &2 &3 &4 |
| /SAPMP/OC_APO001 |
Plant &1 work center &2 capacity category &3 not created |
| /SAPMP/OC_APO002 |
Plant &1 work center &2 capacity category &3 is not a calendar resource |
| /SAPMP/OC_APO003 |
Order indicator &1 is not permitted |
| /SAPMP/OC_APO004 |
Work center must be transferred to SAP SCM |
| /SAPMP/OC_APO005 |
Combined order &1 processed successfully |
| /SAPMP/OC_APO006 |
Combined order &1 is not complete (original order &2 is missing) |
| /SAPMP/OC_APO007 |
Order indicator &1/plant &2 is not defined |
| /SAPMP/OC_APO008 |
Capacity &1/&2/&3 does not exist |
| /SAPMP/OC_APO009 |
Table &1: Entry &2 &3 &4 does not exist |
| /SAPMP/OC_APO010 |
Combined orders transferred successfully to SAP SCM |
| /SAPMP/OC_APO011 |
Processing terminated |
| /SAPMP/OC_APO012 |
Test mode: combined orders not transferred |
| /SAPMP/OC_APO013 |
Select orders to transfer to SAP SCM |
| /SAPMP/OC_APO014 |
System will transfer combined orders to &1 |
| /SAPMP/OC_APO015 |
Plant &1 work center &2 capacity cat. &3: finite planning not permitted |
| /SAPMP/OC_APO016 |
Only production order and process order permitted |
| /SAPMP/OC_APO017 |
Selected orders are assigned to campaign(s) |
| /SAPMP/OC_APO018 |
No capacity requirements for original order &1, operation counter &2 |
| /SAPMP/OC_APO020 |
Combined order &1 contains ERP and SCM-planned materials |
| /SAPMP/OC_APO021 |
Combined order &2 for original order &1 is not planned in SCM |
| /SAPMP/PP_BD001 |
Enter a maximum production length |
| /SAPMP/PP_BD002 |
Max.prod.length and the fixed scrap first and last lengths contain values |
| /SAPMP/PP_BD003 |
Fixed scrap first and last lengths contain values |
| /SAPMP/PP_BD004 |
Fixed scrap first and last length values were deleted |
| /SAPMP/PP_BD005 |
Max. prod. length must be greater than the fixed scrap for any length |
| /SAPMP/PP_BD006 |
Max. prod. length must be a whole multiple of the rounding value |
| /SAPMP/PP_BD007 |
Component & is a length-based material, unlike header material & |
| /SAPMP/PP_BD008 |
Max. prod. length, fixed scrap first and last length values deleted |
| /SAPMP/PP_BD009 |
Reached max. no. of copies; no. of copies is lower than no. entered |
| /SAPMP/PP_BD010 |
Copying not possible; & is not a length-based material |
| /SAPMP/PP_BD011 |
Enter a valid material number |
| /SAPMP/PP_BD012 |
Component & is a length-based material, unlike variant & |
| /SAPMP/PP_BD013 |
Max.prod.lgth. oper.& > max.prod.lgth. oper.&, APO: LC data inconsistent |
| /SAPMP/PP_BD100 |
*BAPI/ALE interface |
| /SAPMP/PP_BD101 |
Enter a work area that is valid in the target system |
| /SAPMP/PP_BD102 |
Select one routing only in change mode |
| /SAPMP/PP_SFC000 |
&1 &2 &3 &4 |
| /SAPMP/PP_SFC001 |
Order &1 operation &2 not found |
| /SAPMP/PP_SFC005 |
No PRTs or no orders selected with PRTs |
| /SAPMP/PP_SFC006 |
You must make an entry in at least one selection field |
| /SAPMP/PP_SFC007 |
Internal assignment error in the output table |
| /SAPMP/PP_SFC008 |
Internal error calling up method GET_SELECTED_ROWS |
| /SAPMP/PP_SFC009 |
Select one operation only |
| /SAPMP/PP_SFC010 |
Selected: PRT &1 in order &2, operation &3, sequence &4 |
| /SAPMP/PP_SFC011 |
PRT & is not a pool header; automatic replacement not possible |
| /SAPMP/PP_SFC012 |
Internal read error: file & |
| /SAPMP/PP_SFC013 |
Auto replacement not possible; no pool member available f. &1 to &2 &3 &4 |
| /SAPMP/PP_SFC014 |
Change to PRT in the operation has failed |
| /SAPMP/PP_SFC015 |
The line selected does not contain an order/operation; change selection |
| /SAPMP/PP_SFC016 |
Internal error extending the output table |